Tag Archives: plastic mould design

Mold Part Cavity Estimation

Determining the number of part cavities in the mold involves the annual estimated volume, monthly ship requirements, part type, and size. Number of cavities NC annual number parts CT cycle …

Spiral Flow

The spiral fl ow test is a form of viscosity measurement used to measure the fl ow of resins in a mold. Using a special mold, as shown in Figure …

Optimizing Product Function-injection moulds

injection mould process affords many opportunities to enhance part functionality and reduce product cost. For example, the per-part mold costs associated with adding functional details to the part design are …

What is Plastic Mold Ejection System?

Once the molded part has cooled sufficiently in the cavity, it has to be ejected. This is done mechanically by KO pins, KO sleeves, stripper plates, stripper rings or compressed …

What is Injection Molds Gating

The gate provides the connection between the runner and the mold cavity. It must permit enough material to flow into the mold to fill out the cavity. The type of …

普人特福的博客cnzz&51la for wordpress,cnzz for wordpress,51la for wordpress