The blow molding process, in comparison with injection molding, is a low pressure process with typical blow air pressures around 25 to 150 psi. There are several different types of blow molding. An overview of each process is outlined below:

Injection Blow Molding
Click to View Simulation
Injection blow molding is used in the production of large quantities of hollow plastic objects. The process starts with the injection molding of a polymer onto a core pin which is then rotated to a blow molding station to be inflated and cooled. Typically used to make small medical and single serving bottles, injection blow molding is the least-used of all blow molding processes.

Extrusion Blow Molding

Extrusion blow molding can be used to process many different polymers including polyethylene,polyvinyl chloride, polypropylene and more. The process begins with the conventional downward extrusion of a tube. When the tube reaches the desired length the mold is closed catching and holding the neck end open and pinching the bottom end closed.

Then a blow-pin is inserted into the neck end of the hot tube to form the threaded opening and inflate the tube inside the mold cavity. When the mold is completely cooled it is opened to eject the bottle and the excess plastic is trimmed from the neck and bottom areas.

Stretch Blow Molding

The main applications of stretch blow molding includes jars, bottles, and similar containers because it produces items of excellent visual and dimensional quality compared to extrusion blow molding. The process first requires the plastic to be injection molded into a ‘preform’ with the finished necks (threads) of the bottles on one end.

The preform is then heated above its glass transition temperature and blown, using high pressure air, into bottles using metal blow molds. At the same time the preform is stretched with a core rod to fill inside of the mold. Strain hardening occurs as part of the stretching process of some polymers (such as Polyethylene Terepthalate) which allows the bottles to resist deforming under the pressures resulting from carbonated beverages (typically around 60 psi).

Other Posts


Category: Blow Molds

About the Author


Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


普人特福的博客cnzz&51la for wordpress,cnzz for wordpress,51la for wordpress